Insight category · 84 articles · Page 4 of 10
System architecture, sensing, interfaces and acceptance methods.
Article archive
Showing 28–36 of 84
security camera time synchronization
Align security camera and platform timelines by defining timestamp origin, NTP health, offset checks and recovery behavior after clock or network failures.
traffic detector data quality
Define traffic detector quality states, interval completeness and late-data handling so missing measurements do not become zero counts or misleading averages.
traffic headway measurement
Measure vehicle time headway and gap from defined crossing events, lane identity and synchronized timestamps, with a worked example and validation rules.
traffic occupancy vs density
Distinguish traffic occupancy, density and flow using their units, observation windows and assumptions before building queue or congestion indicators.
radar cosine error
Estimate traffic radar cosine effects, distinguish radial from road-aligned speed, and prevent double correction when validating a roadside sensor.
piezometer monitoring
Interpret piezometer records using calibration, pressure reference, sensor elevation and appropriate environmental corrections before comparing pore-pressure trends.
robotic total station monitoring
Design robotic total station monitoring around stable reference prisms, visibility, measurement cycles and independent checks before interpreting movement.
ground based radar atmospheric correction
Evaluate ground-based radar atmospheric correction using stable references, independent checks, weather records and displacement residuals.
radar line of sight displacement
Interpret radar line-of-sight displacement using projection geometry, sign conventions and independent sensors before treating a small signal as stability.
Use an article to define the decision, then share the mission, site and destination for a project-specific review.
Start a technical inquiry