Insight category · 84 articles · Page 5 of 10
System architecture, sensing, interfaces and acceptance methods.
Article archive
Showing 37–45 of 84
ROV cathodic protection inspection
Specify an ROV cathodic protection inspection record covering reference electrodes, probe contact, asset position, repeat readings and interpretation limits.
side scan sonar shadows
Read side-scan sonar highlights and shadows using viewing geometry, preserve contact uncertainty, and plan the evidence needed for ROV reacquisition.
ROV DVL navigation
Understand ROV Doppler velocity logs, bottom-lock quality, navigation drift and integration checks before relying on station keeping or repeat inspection tracks.
USBL positioning
Plan ROV USBL positioning around acoustic range, heading, lever arms, sound speed and timing, with a simple error budget and independent verification.
drone battery health
Track drone battery condition by pack identity, comparable flight records, maintenance status and manufacturer limits instead of relying on charge percentage.
thermal camera emissivity
Understand emissivity and reflected temperature in drone thermal inspection, and document the evidence needed to distinguish a reflection from a real anomaly.
drone ground sampling distance
Calculate drone ground sampling distance from height, sensor size and focal length, then separate image resolution from survey accuracy and terrain coverage.
drone mapping motion blur
Estimate drone mapping motion blur in pixels, distinguish exposure smear from rolling-shutter distortion, and set a practical field image-quality check.
Traffic sensor vehicle classification validation
Validate vehicle classification with a declared schema, synchronized truth, stratified sampling, confusion matrices, unknown labels, lane slices, and repeatable QA.
Use an article to define the decision, then share the mission, site and destination for a project-specific review.
Start a technical inquiry